A lot of houses were traditionally made with wooden trim and baseboards. While the craftsmanship shows, and the bold colors of the wood certainly make a statement, unfortunately stained trim has become a style that ages your homes appearance. Also, unfortunate, is how difficult it can be to just cover it up with a coat of white paint. Learning from personal experiences, and a lot of trial and error, we have come up with a list of instructions, suggestions, and ideas to help you (and let you learn from our mistakes).

For starters, as previously mentioned, do not just start to paint with white paint and expect high quality results. While it sounds good in theory, the reality is that it just won’t work – there will be streaks, bumps, and a lot of imperfections. Step one must be breaking out the sand paper. Depending on how much trim you have, we suggest the foam sanding cubes, or even a power sander with a light grit paper. At this point, you’ll have to feel out your own situation – how many layers of stain or clear coat were used over the years – and judge how many times you will have to sand. You will probably not get all the color out of the wood, and that’s okay, but try to get down to a surface that will allow the wood to take on new layers of paint.

Once everything is sanded, then it is time for the priming. This is the place you want to invest your money. The higher quality the primer, the better the final project will look – look for primers specifically for hard to cover surfaces. Apply three layers of primer. While it may seem unnecessary, it is important! By the time you get to your final coat of white paint, you want to make sure the surface is covered, clean, and smooth, and the multiple layers of primer will help you to get there.

Finally, time for the white paint. You want to choose a glossy or semi-gloss finish for the trim paint. Not only will it help to hide any imperfections when the paint has a bit of a shine to it, but it is also much easier to maintain trim that has some glossiness – and being that you are going with white – you need easy to clean!

In most cases, if you follow these directions step by step, you will come out with a refreshed, bright, and updated space. This is one case where cutting corners will definitely lead to more work in the long run – but remember it will be worth it when you’re done!!

Continue Reading